Ultimate-speed ULSP 2 A1 Uživatelský manuál stáhnout pdf (Strana 10)

ULSP 2 A1

Reference measuring mode

In this mode, you can compare the paint thicknesses on

various surfaces: for example, on one particular vehicle.

This is useful for determining diﬀ erences in paint thicknesses.

For example, you can quickly ﬁ nd out whether a surface has

been repainted or ﬁ lled.

♦ When the device is in normal measuring mode, place the

measuring sensor

at right angles to the surface to be

measured.

NOTE

► The best place to start is the roof of a car, which nor-

mally will not hav

e been repainted or ﬁ lled. The paint

coat to be measured must be thinner than 1.8 mm. The

reference measuring mode only works if the yellow or

the green LED is illuminated.

♦ Press the TEST button

during the measuring process.

The measured paint thickness is now used as a reference

value. The red and green LEDs will ﬂ ash alternately.

♦ As soon as you remove the measuring sensor

from the

reference surface, the red and the yellow LEDs will ﬂ ash

alternately.

♦ Now place the measuring sensor

on the surface to

be compared: for example, the wing. The LEDs will now

ﬂ ash in two possible combinations:

IB_91055_ULSP2A1_SK_RO_OS.indb 7IB_91055_ULSP2A1_SK_RO_OS.indb 7 22.07.13 11:5322.07.13 11:53

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Žádné komentáře

Ultimate-speed ULSP 2 A1 Uživatelský manuál Strana 10